Look! More Phaeton! This time we’re on a do-over mission. Awhile back we installed a new Frigidaire convection/ Micro oven in place of an oven that failed. Now we’re replacing that new Frigidaire because it’s no good. Just no good at all. It won’t preheat above 300º even if it’s set for 450º and when you put food in it it drops to 200º and sits there looking stupid at you. The thing can’t get a meatloaf to 165º so it’s basically a botulism machine
The repair person came out and said the sensor and the mother board are bad, but that new parts are not available. Out of stock. Plus the oven has to come down/ out to be repaired. P.S., Home Depot does not allow customers to return major appliances even if they are defective. Bad Home Depot! Bad!
Since We’ve done this before the crappy oven came down pretty quick. Installing the new oven required moving the top support and drilling new holes. The backing plate was replaced with the plate for the new oven, and the vent fan was switched to vent outside
Since this is in an RV we installed more fasteners that you would for a house install. There is a row of screws into the framing under the bottom cover all along the back of the oven, there are screws through the oven frame into the cabinet frame on both sides too
Maybe you are thinking “Hey, this is a lot more pictures than normal” and you are right. In addition to being a Repairs & Mods post it’s also the install/ uninstall guide for the next person who works on this coach